MFP Automation Engineering

MFP Automation Engineering

Added to Cart

MFP Automation Engineering

Categories

Click here to filter products by technical characteristics(+)

Parker Hannifin
71215SN1EN00N0D100C2
2-way 2-positions (2/2) Normally Closed (NC) pneumatic stainless steel direct-acting solenoid valve (Cv 0.06) - class F coil - Parker Hannifin (Skinner 7000 series) - 1/8" NPT threaded ports - 24Vdc solenoid (10W) - Pre-equipped with DIN 43650A / ISO44...
Contact for availability
1. Pneumatic systems
2. Pneumatic valves
3. Pneumatic valves (electrically actuated)
Parker Hannifin
3199 56 10
Pneumatic 90° elbow fitting with ext. HEX - threaded + push-in (push-to-connect) design - Parker Hannifin (LF3000 series) - 1/4" push-to-connect connection + G1/8" male thread - Glass-fiber-reinforced nylon 6.6 body / Nitrile D seals - 90° L-shaped elb...
Contact for availability
$8.12
1. Pneumatic systems
2. Pneumatic fittings
Parker Hannifin
WS002N
Compressed air filter assembly / air and gas water separator - Parker Hannifin / Balston (Pneumatic systems - WS series) - 1/8" NPT threaded female port - Rated for 232psig / 16barg - Rated flow 25SCFM / 42Nm3/hr - Rated for +1.7°C...+80°C / +35°F...+1...
Contact for availability
1. Pneumatic systems
2. Pneumatic air filters
Parker Hannifin
C7E
Solenoid coil - class H insulation - Parker Hannifin - 24Vac (60Hz) solenoid (10W) - Pre-equipped with 1/2" NPT cond. entry and 18" / 45cm bare end flying leads and ground lead (solen.) - IP69K
Contact for availability
1. Pneumatic systems
2. Pneumatic valves
Parker Hannifin
207P-2
Pneumatic standard coupling fitt. with 9/16" ext. HEX - threaded design - Parker Hannifin (Couplings (standard)) - 1/8" female thread on all ends - Brass body - Straight shape - equivalent to 207P2
IN STOCK
$5.07
1. Pneumatic systems
2. Pneumatic fittings
Parker Hannifin
4895 22 22
1-way unidirectional pneumatic stainless steel non-return / check valve - Parker Hannifin (4895 series) - 1/2" NPT threaded ports - Stainless steel (SUS316L) vessel / FKM seal - 15mm nominal diameter - 3.6psi / 0.25bar nom. cracking pressure - 580psi /...
Contact for availability
$152.00
1. Pneumatic systems
2. Pneumatic valves
3. Pneumatic check valves
Parker Hannifin
144F-8
Fluid (gas/fuel/refrigerant) tee / T-shaped fitting - threaded (SAE 45° flare) design - Parker Hannifin (144F series) - 1/2" SAE 45° male flares on all ends - Brass body - "T" Tee-shaped fitting - #144F model - equivalent to 144F8
Contact for availability
$36.50
1. Pneumatic systems
2. Pneumatic fittings
Parker Hannifin
207ACBH-12
Straight bulkhead fitting with 1-1/2" ext. HEX + 1-1/2" backup HEX - threaded design - Parker Hannifin (Bulkheads) - 3/4" threaded female pipe connection + 1-5/16" (1-5/16-12; 1-5/16x12) male pipe thread - Brass body - Straight fitting - #207ACBH model...
Contact for availability
$273.67
1. Pneumatic systems
2. Pneumatic fittings
Parker Hannifin
7982 22 22
3-way manually-actuated pneumatic quick-exhaust valve - Parker Hannifin (7982 series) - 1/2" NPT threaded ports - Nickel-plated brass body / nylon seal - 10psi-150psi (0.6bar-10.3bar) operating pressure - for compressed air media - equivalent to 79822222
Contact for availability
$28.43
1. Pneumatic systems
2. Pneumatic valves
3. Pneumatic valves (manually actuated)
Parker Hannifin
06E34B13A
Compact compressed air preparation unit filter / regulator with metal bowl and sight gauge - Parker Hannifin / Balston (Pneumatic systems) - manual twist drain - 1/2" NPT threaded female port + 1/8" NPT threaded female gauge port - Rated for 15-250psig...
Contact for availability
1. Pneumatic systems
2. Pressure regulators
Parker Hannifin
AD0200-35
Compressed air membrane dryer for +35°F (+2°C) dewpoint - Parker Hannifin / Balston (Pneumatic systems - AD series) - automatic drain - 1/2" NPT threaded female inlet and outlet ports - Rated for 150psig / 10barg - Rated flow 20SCFM / 34.6Nm3/hr at 100...
Contact for availability
1. Pneumatic systems
2. Pneumatic air dryers
Parker Hannifin
4 BTI2-B
Nut and ferrule - Parker Hannifin (Intru-Lok series) - 1/4" diam. female flareless bite type connection - Brass body - equivalent to 4BTI2B / 4-BTI2-B
IN STOCK
$10.52
1. Pneumatic systems
2. Pneumatic fittings
3. Pneumatic fitting replacement parts
Parker Hannifin
20-623
Condensation removal drain - 23gallons/day (87L/day) capacity - Parker Hannifin / Balston (Pneumatic systems) - Supply voltage 120Vac - 1/2" NPT threaded female port - Rated for 3-232psig / 0.2-16bar - Rated flow 2472SCFM 100psig / 4200m3/hr at 6.9barg...
Contact for availability
1. Pneumatic systems
Parker Hannifin
209P-12-4
Pneumatic bushing with 1-1/8" ext. HEX - threaded design - Parker Hannifin (Bushings) - 3/4" male thread + 1/4" female thread - Brass body - Straight shape - #209P model - equivalent to 209P124
Contact for availability
$25.99
1. Pneumatic systems
2. Pneumatic fittings
Parker Hannifin
V506P-6-04
2-way 2-positions (2/2) manually-actuated pneumatic ball valve with 2 x 15/16" external HEX + tee handle - female-female pipe ends - Parker Hannifin (506 series) - 9/16"-18 straight threaded ports - Brass body / PTFE seal - Individual in-line installat...
Contact for availability
$119.66
1. Pneumatic systems
2. Pneumatic valves
3. Pneumatic valves (manually actuated)
Parker Hannifin
FC601-6-6
Remote pneumatically-piloted control blocking valve with 24mm external HEX - Parker Hannifin (FC601 series) - 3/8" push-in ports (inlet & outlet) + 5/32" push-in port (lockout control) - Brass vessel / NBR seal - 15psi-145psi (1bar-10bar) operating pre...
Contact for availability
1. Pneumatic systems
2. Pneumatic valves
3. Pneumatic valves (pneumatically actuated)
Parker Hannifin
4K007
Mounting bracket - for 1-1/4" NPT port vlv. - Parker Hannifin
Contact for availability
1. Pneumatic systems
Parker Hannifin
3310 06 13
In-line manifold - Parker / Legris Rectus - G1/4" threaded pneumatic ports - Treated Aluminium body / NBR seal - 8-stations - equivalent to 33100613
Contact for availability
$43.39
1. Pneumatic systems
2. Pneumatic manifolds
Parker Hannifin
393PD-6-6
Shut-off type insert with 1/2" external square + plug-in stem - threaded + push-in design - Parker Hannifin (Poly-Tite series) - 3/8" insert diameter - 1/2" (1/2-24; 1/2x24) threaded compression connection + 3/8" push-in connection - Brass body (Chromi...
Contact for availability
$149.09
1. Pneumatic systems
2. Pneumatic fittings
Parker Hannifin
BG441-NBL
Blow gun with extended nozzle - Parker Hannifin (BG series) - Thermoplastic - Black - equivalent to BG441NBL
Contact for availability
$92.27
1. Pneumatic systems
Parker Hannifin
17L32BE
Mist lubricator for pneumatic systems - Parker Hannifin / Balston (Pneumatic systems - 17L series) - 1/2" NPT threaded female port + 1/4" NPT threaded female gauge port - Rated for 150psig / 10.3barg - Materials Zinc (Head) / Polycarbonate (bowl / sigh...
IN STOCK
$171.31
1. Pneumatic systems
2. Air lubrication
Parker Hannifin
P3NKA00PN
Control knob - Parker Hannifin / Balston (Pneumatic systems)
Contact for availability
$19.02
1. Pneumatic systems
Parker Hannifin
0683 00 11
Pneumatic silencer - Parker Hannifin - Stainless steel 316L body - 1/8" NPT male thread - Stainless steel 316L body - 0.55" length - equivalent to 6830011 / 0683-00-11
Contact for availability
$20.10
1. Pneumatic systems
2. Pneumatic mufflers
Parker Hannifin
68CA-4-4
Pneumatic compression fitting with 9/16" ext. HEX - threaded + push-in design - Parker Hannifin (Compress-Align series) - 1/4" compression connection + 1/4" NPTF male thread - Brass body - Straight fitting - #68CA model - equivalent to 68CA44
Contact for availability
$11.52
1. Pneumatic systems
2. Pneumatic fittings
Parker Hannifin
5 FNI-B
Cap - Parker Hannifin (Intru-Lok series) - 5/16" diam. female flareless bite type connection - Brass body - equivalent to 5FNIB / 5-FNI-B
Contact for availability
$102.43
1. Pneumatic systems